Item #	Description	Price	Cart
MS-111KIT Product Specs ms-111kit.gif	WHITE MC111M MASTER PACK System Package offers many of the basic components needed to assemble a five room intercom system. The package includes: (1) - Model MC111M Music/Communication System (5) - Model N14 Intercom Remote Stations with Monitor (1) - Model DS3B Intercom Door Speaker with Bell Button For rough in components, order the Model 111RXX: MC111 Rough-in Kit. Expandable up to nine remote stations Maximum power output 12 watts Expandable up to two door speakers Frequency response 17 Hz to 30 kHz Hands-free door communication Three-note door chime Optional eight-note door chime with Model MC8	Login or Call for Pricing.	You must login to order. Login or Sign up
MS-112281 Product Specs ms-112281.gif	REPLACE BELT/HAYDENHD	Original Dealer Price $8.12 Sale Price $4.26 Call for Quantities DISCONTINUED IN STOCK AND ON SALE	You must login to order. Login or Sign up
MS-112416 Product Specs ms-112416.gif	HAYDEN 30FT VAC HOSE	Original Dealer Price $132.67 Sale Price $69.65 Call for Quantities DISCONTINUED IN STOCK AND ON SALE	You must login to order. Login or Sign up
MS-2000-2762235 Product Specs ms-2000-2762235.gif	MS-2000 HARDWARE KIT	Original Dealer Price $5.27 Sale Price $2.77 Call for Quantities DISCONTINUED IN STOCK AND ON SALE	You must login to order. Login or Sign up
MS-730361-3 Product Specs ms-730361-3.gif	CIRCUIT BOARD FOR ZX7000 REPLACEMENT CIRCUIT BOARD FOR ZX7000 MFG'D AFTER 2000.	Login or Call for Pricing.	You must login to order. Login or Sign up
MS-785001-2 Product Specs ms-785001-2.gif	FIBER DUST FILTER GOES UNDER B FIBER DUST FILTER. GOES UNDER BAG IN VAC MOTOR.	Login or Call for Pricing.	You must login to order. Login or Sign up
MS-AV700 Product Specs ms-av700.gif	DISC**USE MS-AV4500	Original Dealer Price $460.00 Sale Price $241.50 Call for Quantities DISCONTINUED IN STOCK AND ON SALE	You must login to order. Login or Sign up
MS-AVP-7500 Product Specs ms-avp-7500.gif	PLATINUM VAC 7500 SQ FT Platinum Series Disposable Bag Central Vacuum System is a disposable bag central vacuum power unit. The AVP7500 is modular in design with nested components that reduce storage space and shipping costs. The nested design also simplifies handling, installation and service. The AVP7500 has 551 peak air watt capacity and can be installed in homes up to 7,500 square feet. For installation flexibility, both the intake and exhaust ports can be connected from the left or right side. A front-mounted utility port allows easy connection of a hose directly to the power unit for local cleaning. The vacuum’s control panel has a power switch, four-color bag debris level display, two-color service indicator, and a service reset button. The power unit's permanent fabric filter provides filtration down to .1 micron diameter. The slide-gate collar dust bag mounts inside the debris bucket on the bottom of the power unit and holds up to 5.2 gallons of dust and dirt. Two easy-to-access swing-down latches secure the debris bucket and are used to access the dust bag. When its time for bag replacement, the slide-gate collar on the bag closes to keep the dust and dirt sealed inside. The central vacuum system’s power is controlled through a low-voltage wire that connects to each wall inlet valve. When a central vacuum hose is inserted into the wall inlet valve, two sensing pins in the valve connect to the trigger ring on the hose end. Some hoses have a solid trigger ring that electrically connects the valve’s sensing pins whenever the hose is inserted into the valve, which starts the vacuum. Other hoses have a split trigger ring that’s connected to a low-voltage control switch in the hose’s handle, allowing the operator to control the vacuum unit’s power. A foam-filled muffler is included for installation in the exhaust system piping. The muffler substantially reduces operating noise. Routing the vacuum’s exhaust through piping to outside the residence assures all remaining dust vents outside of the building. High-efficiency, two-stage filtration for superior cleaning High air watt rating while maintaining low operating noise. Four-color segmented display shows bag debris level Two-color status indicator shows power and motor life Slide-gate collar bag designed for cleaner replacement. Power unit exhausts outside the living area so dust and dirt do not recirculate Hose can plug directly into vacuum at utility port for local cleaning	Login or Call for Pricing.	You must login to order. Login or Sign up
MS-AVP12000 Product Specs ms-avp12000.gif	VAC MOTOR 12000SF BAG TYPE Platinum Series Disposable Bag Central Vacuum System is a disposable bag central vacuum power unit. The AVP12000 is modular in design with nested components that reduce storage space and shipping costs. The nested design also simplifies handling, installation and service. The AVP12000 has 570 peak air watt capacity and can be installed in homes up to 12,000 square feet. For installation flexibility, both the intake and exhaust ports can be connected from the left or right side. A front-mounted utility port allows easy connection of a hose directly to the power unit for local cleaning. The vacuum’s control panel has a power switch, four-color bag debris level display, two-color service indicator, and a service reset button. The power unit's permanent fabric filter provides filtration down to .1 micron diameter. The slide-gate collar dust bag mounts inside the debris bucket on the bottom of the power unit and holds up to 5.2 gallons of dust and dirt. Two easy-to-access swing-down latches secure the debris bucket and are used to access the dust bag. When its time for bag replacement, the slide-gate collar on the bag closes to keep the dust and dirt sealed inside. The central vacuum system’s power is controlled through a low-voltage wire that connects to each wall inlet valve. When a central vacuum hose is inserted into the wall inlet valve, two sensing pins in the valve connect to the trigger ring on the hose end. Some hoses have a solid trigger ring that electrically connects the valve’s sensing pins whenever the hose is inserted into the valve, which starts the vacuum. Other hoses have a split trigger ring that’s connected to a low-voltage control switch in the hose’s handle, allowing the operator to control the vacuum unit’s power. A foam-filled muffler is included for installation in the exhaust system piping. The muffler substantially reduces operating noise. Routing the vacuum’s exhaust through piping to outside the residence assures all remaining dust vents outside of the building. High-efficiency, two-stage filtration for superior cleaning High air watt rating while maintaining low operating noise. Four-color segmented display shows bag debris level Two-color status indicator shows power and motor life Slide-gate collar bag designed for cleaner replacement Power unit exhausts outside the living area so dust and dirt do not recirculate Hose can plug directly into vacuum at utility port for local cleaning	Login or Call for Pricing.	You must login to order. Login or Sign up
MS-AVP24000 Product Specs ms-avp24000.gif	VAC MOTOR 24000SF BAG TYPE Platinum Series Disposable Bag Central Vacuum System is a disposable bag central vacuum power unit. The AVP24000 is modular in design with nested components that reduce storage space and shipping costs. The nested design also simplifies handling, installation and service. The AVP24000 has 627 peak air watt capacity and can be installed in homes up to 12,000 square feet. For installation flexibility, both the intake and exhaust ports can be connected from the left or right side. A front-mounted utility port allows easy connection of a hose directly to the power unit for local cleaning. The vacuum’s control panel has a power switch, four-color bag debris level display, two-color service indicator, and a service reset button. The power unit's permanent fabric filter provides filtration down to .1 micron diameter. The slide-gate collar dust bag mounts inside the debris bucket on the bottom of the power unit and holds up to 5.2 gallons of dust and dirt. Two easy-to-access swing-down latches secure the debris bucket and are used to access the dust bag. When its time for bag replacement, the slide-gate collar on the bag closes to keep the dust and dirt sealed inside. The central vacuum system’s power is controlled through a low-voltage wire that connects to each wall inlet valve. When a central vacuum hose is inserted into the wall inlet valve, two sensing pins in the valve connect to the trigger ring on the hose end. Some hoses have a solid trigger ring that electrically connects the valve’s sensing pins whenever the hose is inserted into the valve, which starts the vacuum. Other hoses have a split trigger ring that’s connected to a low-voltage control switch in the hose’s handle, allowing the operator to control the vacuum unit’s power. A foam-filled muffler is included for installation in the exhaust system piping. The muffler substantially reduces operating noise. Routing the vacuum’s exhaust through piping to outside the residence assures all remaining dust vents outside of the building. 240-volt operation, High-efficiency, two-stage filtration for superior cleaning High air watt rating while maintaining low operating noise. Four-color segmented display shows bag debris level Two-color status indicator shows power and motor life Slide-gate collar bag designed for cleaner replacement. Power unit exhausts outside the living area so dust and dirt do not recirculate Hose can plug directly into vacuum at utility port for local cleaning	Login or Call for Pricing.	You must login to order. Login or Sign up
MS-AVP3000 Product Specs ms-avp3000.gif	VAC MOTOR 3000SR BAG TYPE Platinum Series Disposable Bag Central Vacuum System is a disposable bag central vacuum power unit. The AVP3000 is modular in design with nested components that reduce storage space and shipping costs. The nested design also simplifies handling, installation and service. The AVP3000 has 537 peak air watt capacity and can be installed in homes up to 3,000 square feet. For installation flexibility, both the intake and exhaust ports can be connected from the left or right side. A front-mounted utility port allows easy connection of a hose directly to the power unit for local cleaning. The vacuum’s control panel has a power switch, four-color bag debris level display, two-color service indicator, and a service reset button. The power unit's permanent fabric filter provides filtration down to .1 micron diameter. The slide-gate collar dust bag mounts inside the debris bucket on the bottom of the power unit and holds up to 5.2 gallons of dust and dirt. Two easy-to-access swing-down latches secure the debris bucket and are used to access the dust bag. When its time for bag replacement, the slide-gate collar on the bag closes to keep the dust and dirt sealed inside. The central vacuum system’s power is controlled through a low-voltage wire that connects to each wall inlet valve. When a central vacuum hose is inserted into the wall inlet valve, two sensing pins in the valve connect to the trigger ring on the hose end. Some hoses have a solid trigger ring that electrically connects the valve’s sensing pins whenever the hose is inserted into the valve, which starts the vacuum. Other hoses have a split trigger ring that’s connected to a low-voltage control switch in the hose’s handle, allowing the operator to control the vacuum unit’s power. A foam-filled muffler is included for installation in the exhaust system piping. The muffler substantially reduces operating noise. Routing the vacuum’s exhaust through piping to outside the residence assures all remaining dust vents outside of the building. High-efficiency, two-stage filtration for superior cleaning High air watt rating while maintaining low operating noise. Four-color segmented display shows bag debris level Two-color status indicator shows power and motor life Slide-gate collar bag designed for cleaner replacement. Power unit exhausts outside the living area so dust and dirt do not recirculate Hose can plug directly into vacuum at utility port for local cleaning	Login or Call for Pricing.	You must login to order. Login or Sign up
MS-AVR12000 Product Specs ms-avr12000.gif	VAC MOTOR 12000SF BAGLESS Red Series Bagless Central Vacuum System if a bagless central vacuum power unit. The AVR12000 is modular in design with nested components that reduce storage space and shipping costs. The nested design also simplifies handling, installation and service. The AVR12000 has 570 peak air watt capacity and can be installed in homes up to 12,000 square feet. For installation flexibility, both the intake and exhaust ports can be connected from the left or right side. A front-mounted utility port allows easy connection of a hose directly to the power unit for local cleaning. The vacuum’s control panel has a power switch, four-color bag debris level display, two-color service indicator, and a service reset button. The power unit's permanent fabric filter provides filtration down to .1 micron diameter. The slide-gate collar dust bag mounts inside the debris bucket on the bottom of the power unit and holds up to 6 gallons of dust and dirt. Two easy-to-access swing-down latches secure the debris bucket and are used to access the dust bag. When its time for bag replacement, the slide-gate collar on the bag closes to keep the dust and dirt sealed inside. The central vacuum system’s power is controlled through a low-voltage wire that connects to each wall inlet valve. When a central vacuum hose is inserted into the wall inlet valve, two sensing pins in the valve connect to the trigger ring on the hose end. Some hoses have a solid trigger ring that electrically connects the valve’s sensing pins whenever the hose is inserted into the valve, which starts the vacuum. Other hoses have a split trigger ring that’s connected to a low-voltage control switch in the hose’s handle, allowing the operator to control the vacuum unit’s power. A foam-filled muffler is included for installation in the exhaust system piping. The muffler substantially reduces operating noise. Routing the vacuum’s exhaust through piping to outside the residence assures all remaining dust vents outside of the building. High-efficiency, two-stage filtration for superior cleaning High air watt rating while maintaining low operating noise. Power indicator,Bagless design with debris bucket, no bag to replace. Power unit exhausts outside the living area so dust and dirt do not recirculate Hose can plug directly into vacuum at utility port for local cleaning	Login or Call for Pricing.	You must login to order. Login or Sign up
MS-AVR24000 Product Specs ms-avr24000.gif	VAC MOTOR 24000SF BAGLESS 220V Red Series Bagless Central Vacuum System is a 240-Volt bagless central vacuum power unit. The AVR24000 is modular in design with nested components that reduce storage space and shipping costs. The nested design also simplifies handling, installation and service. The AVR24000 has 627 peak air watt capacity and can be installed in homes up to 12,000 square feet. For installation flexibility, both the intake and exhaust ports can be connected from the left or right side. A front-mounted utility port allows easy connection of a hose directly to the power unit for local cleaning. The vacuum’s control panel has a power switch, four-color bag debris level display, two-color service indicator, and a service reset button. The power unit's permanent fabric filter provides filtration down to .1 micron diameter. The slide-gate collar dust bag mounts inside the debris bucket on the bottom of the power unit and holds up to 6 gallons of dust and dirt. Two easy-to-access swing-down latches secure the debris bucket and are used to access the dust bag. When its time for bag replacement, the slide-gate collar on the bag closes to keep the dust and dirt sealed inside. The central vacuum system’s power is controlled through a low-voltage wire that connects to each wall inlet valve. When a central vacuum hose is inserted into the wall inlet valve, two sensing pins in the valve connect to the trigger ring on the hose end. Some hoses have a solid trigger ring that electrically connects the valve’s sensing pins whenever the hose is inserted into the valve, which starts the vacuum. Other hoses have a split trigger ring that’s connected to a low-voltage control switch in the hose’s handle, allowing the operator to control the vacuum unit’s power. A foam-filled muffler is included for installation in the exhaust system piping. The muffler substantially reduces operating noise. Routing the vacuum’s exhaust through piping to outside the residence assures all remaining dust vents outside of the building.240-volt operation, High-efficiency, two-stage filtration for superior cleaning High air watt rating while maintaining low operating noise. Power indicator, Bagless design with debris bucket, no bag to replace.Power unit exhausts outside the living area so dust and dirt do not recirculate Hose can plug directly into vacuum at utility port for local cleaning	Login or Call for Pricing.	You must login to order. Login or Sign up
MS-AVR3000 Product Specs ms-avr3000.gif	RED VAC 3000 SQ FT. BAGLESS Red Series Bagless Central Vacuum System is a bagless central vacuum power unit.The AVR3000 is modular in design with nested components that reduce storage space and shipping costs. The nested design also simplifies handling, installation and service. The AVR3000 has 537 peak air watt capacity and can be installed in homes up to 3,000 square feet. For installation flexibility, both the intake and exhaust ports can be connected from the left or right side. A front-mounted utility port allows easy connection of a hose directly to the power unit for local cleaning. The vacuum’s control panel has a power switch, four-color bag debris level display, two-color service indicator, and a service reset button. The power unit's permanent fabric filter provides filtration down to .1 micron diameter. The slide-gate collar dust bag mounts inside the debris bucket on the bottom of the power unit and holds up to 6 gallons of dust and dirt. Two easy-to-access swing-down latches secure the debris bucket and are used to access the dust bag. When its time for bag replacement, the slide-gate collar on the bag closes to keep the dust and dirt sealed inside. The central vacuum system’s power is controlled through a low-voltage wire that connects to each wall inlet valve. When a central vacuum hose is inserted into the wall inlet valve, two sensing pins in the valve connect to the trigger ring on the hose end. Some hoses have a solid trigger ring that electrically connects the valve’s sensing pins whenever the hose is inserted into the valve, which starts the vacuum. Other hoses have a split trigger ring that’s connected to a low-voltage control switch in the hose’s handle, allowing the operator to control the vacuum unit’s power. A foam-filled muffler is included for installation in the exhaust system piping. The muffler substantially reduces operating noise. Routing the vacuum’s exhaust through piping to outside the residence assures all remaining dust vents outside of the building. High-efficiency, two-stage filtration for superior cleaning High air watt rating while maintaining low operating noise. Power indicator, Bagless design with debris bucket, no bag to replace Power unit exhausts outside the living area so dust and dirt do not recirculate Hose can plug directly into vacuum at utility port for local cleaning	Login or Call for Pricing.	You must login to order. Login or Sign up
MS-AVR7500 Product Specs ms-avr7500.gif	RED VAC 7500 SQ FT. BAGLESS Red Series Bagless Central Vacumn System is a bagless central vacuum power unit. The AVR7500 is modular in design with nested components that reduce storage space and shipping costs. The nested design also simplifies handling, installation and service. The AVR7500 has 551 peak air watt capacity and can be installed in homes up to 7,500 square feet. For installation flexibility, both the intake and exhaust ports can be connected from the left or right side. A front-mounted utility port allows easy connection of a hose directly to the power unit for local cleaning. The vacuum’s control panel has a power switch, four-color bag debris level display, two-color service indicator, and a service reset button. The power unit's permanent fabric filter provides filtration down to .1 micron diameter. The slide-gate collar dust bag mounts inside the debris bucket on the bottom of the power unit and holds up to 6 gallons of dust and dirt. Two easy-to-access swing-down latches secure the debris bucket and are used to access the dust bag. When its time for bag replacement, the slide-gate collar on the bag closes to keep the dust and dirt sealed inside. The central vacuum system’s power is controlled through a low-voltage wire that connects to each wall inlet valve. When a central vacuum hose is inserted into the wall inlet valve, two sensing pins in the valve connect to the trigger ring on the hose end. Some hoses have a solid trigger ring that electrically connects the valve’s sensing pins whenever the hose is inserted into the valve, which starts the vacuum. Other hoses have a split trigger ring that’s connected to a low-voltage control switch in the hose’s handle, allowing the operator to control the vacuum unit’s power. A foam-filled muffler is included for installation in the exhaust system piping. The muffler substantially reduces operating noise. Routing the vacuum’s exhaust through piping to outside the residence assures all remaining dust vents outside of the building. High-efficiency, two-stage filtration for superior cleaning High air watt rating while maintaining low operating noise. Power indicator, Bagless design with debris bucket, no bag to replace. Power unit exhausts outside the living area so dust and dirt do not recirculate. Hose can plug directly into vacuum at utility port for local cleaning	Login or Call for Pricing.	You must login to order. Login or Sign up
MS-AWP Product Specs ms-awp.gif	AUDIO INPUT WALL PLATE (WHITE) The Model AWP Audio Input Wall Plate (White) is a stereo audio input wall plate for use with dmc1 or dmc3-4 Music/Communication System Master units. The wall plate provides an audio termination point for connection of an external music source to the Music/Communication System Master unit. The AWP Audio Input Wall Plate has two pairs of color-coded left-right RCA jacks and mounts in a single-gang J-box. The faceplate is white.	Login or Call for Pricing.	You must login to order. Login or Sign up
MS-AWPMRX Product Specs ms-awpmrx.gif	MONO AUDIO ROUGHIN KT	Original Dealer Price $29.21 Sale Price $15.34 Call for Quantities DISCONTINUED IN STOCK AND ON SALE	You must login to order. Login or Sign up
MS-BD3 Product Specs ms-bd3.gif	BRIGHT BRASS DOOR NO BUTTON A voice communications interface that mounts adjacent to a primary entry door. This model is compatible with the dmc1 and dmc3-4 Music/Communication Systems. The residence’s existing doorbell button is used to announce a visitor. Two-way voice communication with the resident occurs through the unit’s built-in speaker. The door station mounts recessed in the wall using a Model ME3 Door Station Rough-in Enclosure. Bright brass finish faceplate Two-way voice communications Mounts in Model ME3 Door Station Rough-in Enclosure	Login or Call for Pricing.	You must login to order. Login or Sign up
MS-BD3B Product Specs ms-bd3b.gif	BRIGHT BRASS DOOR (W/BUTTON) A voice communications interface that mounts adjacent to a primary entry door. This model is compatible with the dmc1 and dmc3-4 Music/Communication Systems. Pressing the lighted bell button will trigger the doorbell chime on the Music/Communications system to announce a visitor. Two-way voice communication with the resident occurs through the unit’s built-in speaker. The door station mounts recessed in the wall using a Model ME3 Door Station Rough-in Enclosure. Bright brass finish faceplate,Lighted doorbell button. Two-way voice communications. Mounts in Model ME3 Door Station Rough-in Enclosure Dimensions: Height - 6-1/4" Width - 4-1/8" Projects - 1/4" Screw Openings - 5-1/4" Apart	Login or Call for Pricing.	You must login to order. Login or Sign up
MS-D3 Product Specs ms-d3.gif	ANTIQUE BRASS DOOR (NO BELL)	Original Dealer Price $29.61 Sale Price $15.55 Call for Quantities DISCONTINUED IN STOCK AND ON SALE	You must login to order. Login or Sign up
MS-D360 Product Specs ms-d360.gif	OMNI DIRECTION FM ANT FM Antenna is an omnidirectional turnstile design FM antenna for use with the Models dmc1 and dmc3-4 Music/Communications Systems. Typically the antenna is mounted inside the attic. The antenna connects to the system with the supplied 30-foot, 300-ohm twin-lead cable. Omnidirectional FM antenna Turnstile design 30 feet of 300-ohm twin-lead cable supplied Mounting hardware supplied	Login or Call for Pricing.	You must login to order. Login or Sign up
MS-D3BN Product Specs ms-d3bn.gif	DOOR STATION W/BELL ANTIQUE BR Intercom Door Station with Bell Button is a voice communications interface that mounts adjacent to a primary entry door. This model is compatible with the dmc1 and dmc3-4 Music/Communication Systems. Pressing the lighted bell button will trigger the doorbell chime on the Music/Communications system to announce a visitor. Two-way voice communication with the resident occurs through the unit’s built-in speaker. The faceplate of the D3BN Intercom Door Station with Bell Button has an antique brass finish. The door station mounts recessed in the wall using a Model ME3 Door Station Rough-in Enclosure.Antique brass finish faceplate. Lighted bell button,Two-way voice communications Mounts in Model ME3 Door Station Rough-in Enclosure. 4.125" W x 6.1875" H	Login or Call for Pricing.	You must login to order. Login or Sign up
MS-DHT100 Product Specs ms-dht100.gif	100WT L/R SPKR 6''WFR	Original Dealer Price $112.00 Sale Price $58.80 Call for Quantities DISCONTINUED IN STOCK AND ON SALE	You must login to order. Login or Sign up
MS-DMC-10KIT Product Specs ms-dmc-10kit.gif	STRUCTURED WIRE INTERCOM SYSTE Structured Wiring Intercom System offers several advanced features never before available in an intercom system. Its distributed hub design provides easy installation and structured wiring mounting compatibility. The room, door, and patio stations showcase a new, contemporary design, crafted to blend smoothly into the installation's decor. Station faceplates are available in a variety of colors to further customize each installation. Room station keypads are illuminated with soft blue indicators while the intercom is in use. The door and patio station keys are illuminated with white lighting for easy nighttime operation. The heart of the system is the Intercom Hub. The intercom hub grid mounts in a structured wiring enclosure. Up to eight room, door, and patio stations in any combination can be connected to the system hub using up to 500 feet of standard Cat-5 cable for each station. For larger installations, a second system hub can be added for expansion, providing a total system capacity of up to 16 stations. The Audio Input Wall Plate can be added to the system to connect an external audio source for distribution throughout the intercom system. The room, patio, and door stations mount inside standard 2-gang junction boxes and are easy to install and wire. Each station and the system hub contains color-coded Type 110 punch-down terminal blocks for fast and reliable connection to Cat-5 cable. A 12-volt switching power supply is included with each intercom hub. This Kit Includes:(1) - DMC-10H Structured Wire Intercom Hub, (4) - DMC-10RS Intercom Room Stations, (1) - DMC-10DS Intercom Door Station, (1) - 12-volt Switching Power Supply	Login or Call for Pricing.	You must login to order. Login or Sign up
MS-DMC1 Product Specs ms-dmc1.gif	MUSIC/INTERCOM MASTER UNIT- WH The system supports up to 15 room stations and up to three door speakers. The built-in AM/FM radio tuner allows setting eight AM station presets and eight FM station presets. The backlit liquid crystal display shows the operation mode, audio source, radio frequency, volume setting, and time. With the optional Model dmc1CD Add-on 6-disc CD changer installed, the display shows the disc number selected and the track number currently playing. Kit Includes: 1 DMC1 Master Station 1 DMC1 Master Rough-in 3 DMC1RS Room Stations 3 Room station Rough-ins. 2 Year Warranty Room and patio stations connect to the master unit using standard Cat-5 cable. All room station models can select talk or listen to other room stations, door speakers and the master unit. Each has an intercom volume control. Pressing the privacy button on a room station prevents that room from being monitored. The Model dmc1RS room stations and dmc1RW patio stations can select the audio source, control the radio tuner, and set the master music volume. This system will allow you to monitor a room from all other rooms in the house. This feature works great for monitoring small children. Door Bell Speakers You can add up to 3 doorbell speakers. When used with the chime module, you will hear a chime through each room station alerting you someone is at the door. Press "Door Talk" at any room station to speak to your front door. It is then hands free for the people to speak back. Controls up to 15 Room Stations or Patio Stations and 3 Door-Bell Speakers. - This 30W (RMS) home entertainment system is great for distributing music, and communication throughout your entire home, and patio. Supports 15 room stations and 3 door speakers Frequency Response; 20Hz - 20Khz 30W (RMS) maximum output power 2 Music Source Inputs (CD player, MP3 Player.)8 AM / 8 FM music presets Speaker remote volume / Source control Privacy / Intercom only / door release feature Programmable monitor override Automatic on/off feature Wireless remote control option. Dimensions 15-1/4" (W) x 5-5/16" (H)	Login or Call for Pricing.	You must login to order. Login or Sign up

Previous Page 1 2 3 4 5 6 7 8 9 10 Next Page

Note: prices subject to change without notice.